10 point crossbow titian ss how to#
10 point crossbow titian ss pro#

While using a TenPoint crossbow, when you cocked the bow and placed it on the tripod to load an arrow, you may have seen that the paint on the inside of both limbs had seemingly chipped away.Īnd after one year of shooting, the limbs usually began to crack. If the strings are broken, you have to replace them. As the bolts tend to shift after a few uses.īe sure to measure the distance between the bolt and the string before each shot. Space the bolt out from the string by two inches. The TenPoint Shadow NXT model is plagued with string issues. It is also possible that ancient, worn-out crossbows will have trouble pulling back since their strings are too broken or torn. The string issue will occur if the bolt is not properly placed. The crossbow string could become dislodged from the cocking mechanism of a TenPoint crossbow. The box holding the trigger should drop down easily. The crank handle’s plug-in knob must be unscrewed by hand by turning it counterclockwise (CCW) a couple of revolutions. Another possibility is that the trigger’s knob is broken. Pulling the trigger will not work because the trigger box is held back by a component that prevents it from moving forward when the release is pressed.Īny obstruction on the trigger will cause issues. A few shots in, the trigger box becomes stuck and will not unlock. They will likely be able to quickly identify the problem and either fix it or send you a replacement scope. The best thing to do is contact TenPoint by phone or email. To improve your shooting, you can swap it out for a pro-view scope. Fix it or get a new one if it breaks as a broken one prevents the dots from lighting up. In the back of your crossbow’s storage compartment is a focus ring, where you can adjust the bow’s point of aim.

10 point crossbow titian ss pro#

Some versions of crossbow have a problem with their scopes, including the TenPoint Shadow and the TenPoint Pro Slider. The crossbow does not always shoot immediately after being cocked, and the dots do not always light up. The standard TenPoint sight for crossbows frequently fails to provide adequate illumination. Verify the crossbow’s hooks and set them properly. Problemsįix the focus ring and replace the malfunctioning scope.

10 point crossbow titian ss how to#

Let’s have a look at a table that lists the most frequently encountered issues with the TenPoint crossbow and how to deal with them.